500tons Galvanized Pressed Steel Water Storage Tank Stainless Steel Water Tank Making Hydraulic Press Machine

Product Description

REAL SHOT:

 Main technical parameters of the equipment

(order number)	(ITEM)		(UNIT)	(NORMS)
1	(Nominal capacity)		KN	5000
2	(The maximum working pressure of the fluid)		MPa	25
3	(Master cylinder effective stroke)		mm	800
4	(Maximum opening height)		mm	1250
5	(Effective area ofworking table)	(L/R)	mm	1400
		(F/B)	mm	1400
6	(ram speed)	rapid down	mm/s	120
		working speed	mm/s	5-12
		return trip	mm/s	80
		return	mm/s	45
7	motor power		KW	44

Galvanized Steel Water Tank is punched by Q235A into 1220mm*1220mm or 1000mm*1000mm and 1000mm*500mm, 500mm*500mm standard plates, drilled around, after HDG treatment, and assembled at site. When combined, the gap between two standard plates is sealed by silicon pad, and connected by bolts. 

Water capacity varies from 1.0 cubic meter to 1000 cubic meters, height may reach as great as 5 meters. 
Inflow, outflow tubes as well as return tube's diameter and place is decided by the designer, passages of at least 7000mm is needed around the tank. 



Hot dipped galvanized steel water tank is anti-corrosion, anti-aging, no distorsion, no infiltration and leakage. Tank is easy to clean and conveniently to install and assemble. It can storage not only hot water, but also cold water, and has a better shockproof and shock resistant ability. 
Details of the machine:
WORK SHOP:
DELIVERY SHOT:
FAQ:

1. Are you the manufacturer?

We are a manufacturer, committed to the design and production of hydraulic press for more than 20 years.

2. Is the machine easy to operate? Will you teach us how to use it?

We will teach you to use it for free. If there is no epidemic situation, we can install and debug the machine at your door.