1250 tons metal cake maker
Application of the equipment, the usage conditions
This series press is a general purpose hydraulic machine. Applicable to metal materials tensile, Bending, flanging, Leng Ji, blanking process. Also suitable for calibration. Pressing, powder products, Abrasive products, pressing and plastic products. Insulation materialsrepression molding.
The machine work pressure, pressing speed, Process all canb be Adjustable parameters in the range specified according to the process requirement.
This machine has an independent body and the electrical power system.
And with centralized control buttons. Can realize manual, semi-automatic, automatic three kinds of mode of operation. Can realize the constant pressure and Cheng two pressing mode.
Equipment application:
1,Equipment work area temperature: -5~50ºC(±)
2, Electric supply: three-phase four-wire system 415V.50HZ. scope range of the fluctuation of voltage 415V±10%
3, Hydraulic system using the medium: 46#anti-wear hydraulic oil
| order number |
ITEM |
UNIT |
NORMS |
| 1 |
(Nominal capacity) |
KN |
12500 |
|
| 2 |
Nominal ejection force of bottom cylinder |
KN |
1000 |
|
| 3 |
The maximum working pressure of the fluid |
MPa |
25 |
|
| 4 |
Master cylinder effective stroke |
mm |
700 |
|
| 5 |
Bottom cylinder ejection stroke |
mm |
350 |
|
| 6 |
Maximum opening height |
mm |
1100 |
|
| 9 |
motor power |
KW |
56.4*4 |
|
Main Features
This series of presses is a general-purpose hydraulic press, also known as universal hydraulic press. It is suitable for the stretching, bending, flanging, cold extrusion, punching and other processes of metal materials. It is also suitable for calibration, press-fit, powder products, abrasive products. Molding and press molding of plastic products and insulating materials.
The working pressure, pressing speed and stroke of the machine can be adjusted within the specified parameters according to the process requirements. This machine has independent power mechanism and electrical system, and adopts button centralized control, which can realize manual, semi-automatic and two operation modes. It can realize two pressing methods: constant pressure and fixed stroke.
Equipment use conditions:
1. Equipment working area temperature: -10~60°C (±)
2, power supply: three-phase four-wire system 380V, 50HZ, voltage fluctuation range 380V ± 10%
3, cooling method: water cooling device
4, the hydraulic system uses the medium: No. 46 anti-wear hydraulic oil
Recommended Products
Company Profile
Packaging & Shipping
FAQ
1. How about your machine quality?We are worry about the quality.
Re: our design including strcture and detailed sercurity and precision has enhanced greatly, and can match all the CE standard or mor strict standard.Our machines distribute worldwide to about 20 countries where there are metal plate industry.And where there are our machines, there are good eputation and terminal user satisfaction.
2. May I send samples to test? Do you have a test fee or not?
Re: Yes, if you could send us samples, it will be better. For testing, we have to customize the moulds according to your products, so the moulds cost will be on your account, of course the moulds belong to you.
Audited Supplier 
){kind=link}